next up previous contents index
Next: 5.3.3 Orthographic Projection (-–Jg Up: 5.3.2 Stereographic Equal-Angle Projection Previous: 5.3.2.2 Rectangular Stereographic Map   Contents   Index


5.3.2.3 General Stereographic Map

In terms of usage this projection is identical to the Lambert azimuthal equal-area projection. Thus, one can make both rectangular and hemispheric maps. Our example shows Australia using a projection pole at 130E/30$^{o}$S. The command used was





#!/bin/sh
#    $Id: GMT_stereographic_general.sh,v 1.1 2001/03/21 04:10:21 pwessel Exp $
#
gmtset DEGREE_FORMAT 1 OBLIQUE_ANOTATION 0
pscoast -R100/-40/160/-10r -JS130/-30/4i -B30g10/15g15 -Dl -A500 -G0 -P \
    > GMT_stereographic_general.ps





Figure 5.14: General stereographic conformal projection with rectangular borders.
\begin{figure}\centering\epsfig{figure=eps/GMT_stereographic_general.eps}\end{figure}

By choosing 0$^{o}$/0$^{o}$as the pole, we obtain the conformal stereonet presented next to its equal-area cousin in the Section 5.3.1 on the Lambert azimuthal equal-area projection (Figure 5.11).



Paul Wessel 2001-04-18