use English;
at the top of your program. This will alias all the short names to the long names in the current package. Some of them even have medium names, generally borrowed from awk.
To go a step further, those variables that depend on the currently selected filehandle may instead be set by calling an object method on the FileHandle object. (Summary lines below for this contain the word HANDLE.) First you must say
use FileHandle;
after which you may use either
method HANDLE EXPR
or
HANDLE->method(EXPR)
Each of the methods returns the old value of the FileHandle attribute. The
methods each take an optional EXPR, which if supplied specifies the new
value for the FileHandle attribute in question. If not supplied, most of
the methods do nothing to the current value, except for
autoflush(), which will assume a 1 for you, just to be
different.
A few of these variables are considered ``read-only''. This means that if you try to assign to this variable, either directly or indirectly through a reference, you'll raise a run-time exception.
while (<>) {...} # equivalent in only while!
while (defined($_ = <>)) {...}
/^Subject:/
$_ =~ /^Subject:/
tr/a-z/A-Z/
$_ =~ tr/a-z/A-Z/
chop
chop($_)
Here are the places where Perl will assume $_ even if you
don't use it:
ord() and
int(), as well as the all file tests (-f, -d) except for -t, which defaults to STDIN.
print() and unlink().
=~ operator.
foreach loop if no other variable is supplied.
grep() and
map() functions.
<FH>
operation's result is tested by itself as the sole criterion of a while
test. Note that outside of a while test, this will not happen.
eval() enclosed by the
current BLOCK). (Mnemonic: like & in some editors.) This variable is
read-only.
` often precedes a quoted string.) This variable is read-only.
eval() enclosed by the current BLOCK). (Mnemonic: ' often follows a quoted string.) Example:
$_ = 'abcdefghi';
/def/;
print "$`:$&:$'\n"; # prints abc:def:ghi
This variable is read-only.
/Version: (.*)|Revision: (.*)/ && ($rev = $+);
(Mnemonic: be positive and forward looking.) This variable is read-only.
$*'' is 0. Default is 0. (Mnemonic: * matches multiple things.) Note that
this variable influences the interpretation of only ``^'' and ``$''. A literal newline can be searched for even when $* == 0.
Use of ``$*'' is deprecated in modern perls.
<>'' never does an explicit close, line numbers increase across ARGV files
(but see examples under eof()). Localizing $. has the effect of also localizing Perl's notion of ``the last read
filehandle''. (Mnemonic: many programs use ``.'' to mean the current line
number.)
"\n\n" means something slightly different than setting it to
"", if the file contains consecutive empty lines. Setting it to
"" will treat two or more consecutive empty lines as a single empty line.
Setting it to "\n\n" will blindly assume that the next input character belongs to the next
paragraph, even if it's a newline. (Mnemonic: / is used to delimit line
boundaries when quoting poetry.)
undef $/;
$_ = <FH>; # whole file now here
s/\n[ \t]+/ /g;
Remember: the value of $/ is a string, not a regexp. AWK has to be better for something :-)
$| tells you only whether you've asked Perl explicitly to flush after each
write). Note that STDOUT will typically be line buffered if output is to
the terminal and block buffered otherwise. Setting this variable is useful
primarily when you are outputting to a pipe, such as when you are running a
Perl script under rsh and want to see the output as it's happening. This
has no effect on input buffering. (Mnemonic: when you want your pipes to be
piping hot.)
$\'' instead of adding \n at the end of the print. Also, it's just like $/, but it's what you get ``back'' from Perl.)
$,'' except that it applies to array values interpolated into a double-quoted
string (or similar interpreted string). Default is a space. (Mnemonic:
obvious, I think.)
$foo{$a,$b,$c}
it really means
$foo{join($;, $a, $b, $c)}
But don't put
@foo{$a,$b,$c} # a slice--note the @
which means
($foo{$a},$foo{$b},$foo{$c})
Default is ``\034'', the same as SUBSEP in awk. Note that if your keys contain binary data there might not be any safe
value for ``$;''. (Mnemonic: comma (the syntactic subscript separator) is a
semi-semicolon. Yeah, I know, it's pretty lame, but ``$,'' is already taken for something more important.)
Consider using ``real'' multidimensional arrays.
$#'' explicitly to get awk's value. (Mnemonic: # is the number sign.)
Use of ``$#'' is deprecated.
$^''.)
write() accumulator for
format() lines. A format contains formline()
commands that put their result into $^A. After calling its format, write() prints out the contents of $^A and empties. So you never actually see the contents of $^A unless you call formline() yourself and then look at it. See the perlform manpage and
formline().
``) command, or system() operator. Note that this is the status
word returned by the wait() system call (or else is made up to
look like it). Thus, the exit value of the subprocess is actually ($? >> 8), and
$? & 255 gives which signal, if any, the process died from, and whether there was a
core dump. (Mnemonic: similar to sh and
ksh.)
Note that if you have installed a signal handler for SIGCHLD, the value of $? will usually be wrong outside that handler.
Inside an END subroutine $? contains the value that is going to be given to exit(). You can modify $? in an END subroutine to change the exit status of the script.
Under VMS, the pragma use vmsish 'status' makes $? reflect the actual VMS exit status, instead of the default emulation of
POSIX status.
$!'' to be anything in particular unless you've gotten a specific error
return indicating a system error.) If used in a string context, yields the
corresponding system error string. You can assign to ``$!'' to set errno if, for instance, you want ``$!'' to return the string for error n, or you want to set the exit value for the die() operator.
(Mnemonic: What just went bang?)
$!, if available. (If not, it's just $! again, except under OS/2.) At the moment, this differs from $! under only VMS and OS/2, where it provides the VMS status value from the
last system error, and OS/2 error code of the last call to OS/2 API which
was not directed via CRT. The caveats mentioned in the description of $! apply here, too. (Mnemonic: Extra error explanation.)
Note that under OS/2 $! and $^E do not track each other, so if an OS/2-specific call is performed, you may
need to check both.
eval() command. If
null, the last eval() parsed and executed correctly (although
the operations you invoked may have failed in the normal fashion).
(Mnemonic: Where was the syntax error ``at''?)
Note that warning messages are not collected in this variable. You can,
however, set up a routine to process warnings by setting $SIG{__WARN__}
as described below.
$< = $>; # set real to effective uid
($<,$>) = ($>,$<); # swap real and effective uid
(Mnemonic: it's the uid you went TO, if you're running setuid.) Note: ``$<'' and ``$>'' can be swapped only on machines supporting setreuid().
getgid(), and the subsequent ones by getgroups(),
one of which may be the same as the first number.
However, a value assigned to ``$('' must be a single number used to set the real gid. So the value given by
``$('' should not be assigned back to ``$('' without being forced numeric, such as by adding zero.
(Mnemonic: parentheses are used to GROUP things. The real gid is the group you LEFT, if you're running setgid.)
getegid(), and the subsequent ones by
getgroups(), one of which may be the same as the first number.
Similarly, a value assigned to ``$)'' must also be a space-separated list of numbers. The first number is used
to set the effective gid, and the rest (if any) are passed to
setgroups(). To get the effect of an empty list for
setgroups(), just repeat the new effective gid; that is, to
force an effective gid of 5 and an effectively empty
setgroups() list, say $) = "5 5"
(Mnemonic: parentheses are used to GROUP things. The effective gid is the group that's RIGHT for you, if you're running setgid.)
Note: ``$<'', ``$>'', ``$('' and ``$)'' can be set only on machines that support the corresponding set[re][ug]id() routine. ``$('' and ``$)'' can be swapped only on machines supporting setregid().
$0'' modifies the argument area that the ps(1) program sees.
This is more useful as a way of indicating the current program state than
it is for hiding the program you're running. (Mnemonic: same as sh and ksh.)
index()
and substr() functions. (Mnemonic: [ begins subscripts.)
As of Perl 5, assignment to ``$['' is treated as a compiler directive, and cannot influence the behavior of
any other file. Its use is discouraged.
warn "No checksumming!\n" if $] < 3.019;
See also the documentation of use VERSION and require VERSION
for a convenient way to fail if the Perl interpreter is too old.
exec()ed processes, while higher file
descriptors are not. Also, during an open(), system file
descriptors are preserved even if the open() fails. (Ordinary
file descriptors are closed before the open() is attempted.)
Note that the close-on-exec status of a file descriptor will be decided
according to the value of
$^F at the time of the open, not the time of the exec.
use strict. See the documentation of strict for more details.
$Config{'osname'}.
argv[0].
@ARGV contains the command line arguments intended
for the script. Note that $#ARGV is the generally number of arguments minus one, because $ARGV[0] is the first argument, NOT the command name. See ``$0'' for the command name.
@INC contains the list of places to look for Perl
scripts to be evaluated by the do EXPR, require, or use constructs. It initially consists of the arguments to any -I command line switches, followed by the default Perl library, probably /usr/local/lib/perl, followed by ``.'', to represent the current directory. If you need to
modify this at runtime, you should use the use lib pragma to get the machine-dependent library properly loaded also:
use lib '/mypath/libdir/';
use SomeMod;
%INC contains entries for each filename that has been
included via do or require. The key is the filename you specified, and the value is the location of
the file actually found. The require command uses this array to determine whether a given file has already been
included.
%ENV contains your current environment. Setting a
value in ENV changes the environment for child processes.
%SIG is used to set signal handlers for various
signals. Example:
sub handler { # 1st argument is signal name
local($sig) = @_;
print "Caught a SIG$sig--shutting down\n";
close(LOG);
exit(0);
}
$SIG{'INT'} = 'handler';
$SIG{'QUIT'} = 'handler';
...
$SIG{'INT'} = 'DEFAULT'; # restore default action
$SIG{'QUIT'} = 'IGNORE'; # ignore SIGQUIT
The %SIG array contains values for only the signals actually
set within the Perl script. Here are some other examples:
$SIG{PIPE} = Plumber; # SCARY!!
$SIG{"PIPE"} = "Plumber"; # just fine, assumes main::Plumber
$SIG{"PIPE"} = \&Plumber; # just fine; assume current Plumber
$SIG{"PIPE"} = Plumber(); # oops, what did Plumber() return??
The one marked scary is problematic because it's a bareword, which means
sometimes it's a string representing the function, and sometimes it's going
to call the subroutine call right then and there! Best to be sure and quote
it or take a reference to it. *Plumber works too. See the perlsub manpage.
If your system has the sigaction() function then signal
handlers are installed using it. This means you get reliable signal
handling. If your system has the SA_RESTART flag it is used when signals
handlers are installed. This means that system calls for which it is
supported continue rather than returning when a signal arrives. If you want
your system calls to be interrupted by signal delivery then do something
like this:
use POSIX ':signal_h';
my $alarm = 0;
sigaction SIGALRM, new POSIX::SigAction sub { $alarm = 1 }
or die "Error setting SIGALRM handler: $!\n";
See the POSIX manpage.
Certain internal hooks can be also set using the %SIG hash.
The routine indicated by $SIG{__WARN__} is called when a warning message is about to be printed. The warning
message is passed as the first argument. The presence of a __WARN__ hook
causes the ordinary printing of warnings to STDERR to be suppressed. You
can use this to save warnings in a variable, or turn warnings into fatal
errors, like this:
local $SIG{__WARN__} = sub { die $_[0] };
eval $proggie;
The routine indicated by $SIG{__DIE__} is called when a fatal exception is about to be thrown. The error message
is passed as the first argument. When a __DIE__ hook routine returns, the
exception processing continues as it would have in the absence of the hook,
unless the hook routine itself exits via a goto, a loop exit, or a die(). The __DIE__ handler is explicitly disabled during the call, so that you can die from a __DIE__ handler. Similarly for __WARN__. See
die, warn and eval.
$^M as an emergency pool after die()ing with this message. Suppose
that your Perl were compiled with -DEMERGENCY_SBRK and used Perl's malloc.
Then
$^M = 'a' x (1<<16);
would allocate a 64K buffer for use when in emergency. See the INSTALL file for information on how to enable this option. As a disincentive to casual use of this advanced feature, there is no the English manpage long name for this variable.